The branch tying machine is a commonly used branch tying tool in our office, because its operation is simple, it can improve overall work efficiency, and reduce the fatigue of traditional manual branch tying, so its application rate is very high. However, there may also be some minor issues during the use of the branching machine. Below, we, the branching machine manufacturer, will discuss the solutions to these minor issues. When there is a nail stuck in the tying machine, let's not rush to use something to pick the nail. First, let's take out the pusher and any unused nails. Secondly, we will use pliers and other tools to remove the stuck nails, then reinstall the nails and thrusters, and they can be used normally again.

Cut the tape continuously

The main reason for the continuous cutting of adhesive tape is that the blade of the binding machine has become dull. We only need to replace the blade to use it normally.

Turning around and dropping the belt

The problem of turning around or dropping the tape refers to the situation where a portion of the tying machine will cut a small piece of tape along the way and drop it onto the work site, requiring an additional cleaning tape program during the tying operation. At the same time, the small pieces of tape that have been cut accumulate, which is quite wasteful.