Electric pruning shears are a handheld electric tool driven by an electric motor, which drives the cutting head through a transmission mechanism. Electric scissors consist of a motor, reducer, camshaft mechanical structure, switch, non reconnectable plug, and cutting tool. The motor drives the camshaft mechanical structure through a reducer, causing the cutter bar to push the upper blade to move repeatedly, while the lower blade is fixed on the tool holder. The power cord is a double core sheathed flexible cable, which forms a non reconnectable plug with the double column rubber plug

&nbsp& nbsp;1、 Battery charging for 5 hours (first charge for 12 hours)

&nbsp& nbsp;2、 Before using the tool, unplug the charger plug and disconnect the connection between the tool and the charger (the tool does not work when connected to the charger)

&nbsp& nbsp;3、 Remove the blade guard

&nbsp& nbsp;4、 Manually turn on the power

&nbsp& nbsp;5、 Before starting cutting, let the cutting blade run empty for a few seconds and listen for any noise, slow speed, or other phenomena in its sound

&nbsp& nbsp;Correct usage method: 1. Do not cut branches beyond the working range of the scissors, do not cut non plant materials such as metal and stones, do not clamp tools with pliers. If the scissors are worn or damaged, please replace them

2. Keep the equipment clean, clean the electric trimmer, battery, and charger with a clean cloth (do not use any corrosive or solvent cleaning agents), and clean the dust on the scissor heads with a soft brush or dry cloth. 3. Do not soak the electric trimmer, battery, and charger in water and other liquids. 4. Please use the device according to the instructions. Do not use it when the electric trim, battery, or charger are damaged. 5. If the stock switch cannot be connected or turned off properly, do not use electric trimming. Electric trimming that cannot be controlled by the switch is dangerous and requires repair

6. Ensure that the switch is turned off when making any adjustments, replacing accessories, or storing electric trims. This protective measure will reduce the risk of accidental activation of electric pruning. 7. Please store the idle electric trimmer in the closed state of the blade, outside the range of children. It is not allowed to operate the electric trimmer without knowledge or instructions. Untrained users are dangerous to use

When using electric trims and accessories, follow the user manual and methods, while considering the working environment and required work. Using electric trimming as a non compliant operation may pose a danger. After use, the moving blade and fixed blade should be cleaned of stains first. Then apply lubricating oil or machine oil to the used part to keep the blade in normal maintenance state. The next use will reduce resistance and increase the service life of the blade